The fully equipped in house Laboratory is designed to control the Quality Process and give on line test results as production goes on for Material testing / Hardness testing / Torque Testing / Crack detector

Every effort is made to ensure quality, This effort is not easily visible from the appearance. The qualities of steel, good forging, heat treatment and finish can only be proved in use.

Our laboratory is equipped with following Machines....only to name a few 
 
1) TORQUE TESTING MACHINE (COMPUTERISED - For torque load capacity of spanners
2) MAGNETIC CRACK DECTECTOR   - For detecting very fine flaws & cracks
3) SALT SPRAY MACHIN    - Testing the Quality of Chrome plating
4) DIGITAL HARDNESS TESTER   - For ensuring specified surface hardness
5) ABRASIVE CUTER FOR MAKING TEST PIECE  - Machines for making test pieces
6) PLATING THICKNESS TESTER   - Chrome plating thickness
7) CHEMICAL LABORATORY    - Chemical composition of Products
The Quality/inspection program is designed to check and recheck the production quality at each strategic stage of the production process i.e. quality program functions from the Raw material to Finished products

The Quality Testing program is listed as below ....also refer the Flow chart diagram.
RAW MATERIAL
  Incoming raw material is Lab tested at entry level to the plant
BLANKING
The Quality of Blanks are checked for primary conformity
FORGING
  The forging Die is Inspected for good forging out put  
PUNCHING
  Inspection at punching stage rejects poorly finished goods
BROACHING
  After broaching all spanners are checked for Jaw accuracy
HEAT TREATMENT 
  Heat treated products are inspected for proper internal structural formation and Hardness of the Product.
GAUGING  
  All Products are checked with gauges for operational fitment
SHOT BALLAST
  Inspection at Shot Ballasting checks for finishing out put
ELECTRO PLATING  
  Final inspection is carried after electroplating stage. This is the final and detailed inspection carried out manually.